Rotary Type Zinc Powder Metal Melting Furnaces Gas and Oil Double Fuel 600Kgs
1. Application
The zinc metal melting furnace is used to melt zinc powder working with diesel oil and natural gas
at the same time.
furnace is rotary type metal melting furnace which is suitable for melting
of zinc powder and zinc scrap with a high efficiency.
2. Standard configuration
- Furnace body, 1 set;
- Burning system for gas, 1 set;
- Burning system for diesel oil, 1 set;
- Electrical control box, 1 set (temperature controller, power regulator)
- Thermal couple, 1 piece;
- Inner tank, 1 piece (F8);
- Lifting mechanism, 1 set;
- Rotary mechanism, 1 set;
3. Supply Scope of zinc metal melting furnace
| No. | Item | Unit | Notes |
| 1 | Furnace body | 1 set | 6mm steel plate |
| 2 | Lifting and rotary mechanism | 1 set | ELECTRIC |
| 3 | Inner tank | 1 piece | F08 20mm |
| 4 | Burning system | 1 set | RIELLO for natural gas |
| 5 | Burning system | 1 set | Riello for diesel oil |
| 6 | Electrical control cabinet | 1 set | PID control |
4. Main Technical Parameters of rotary metal melting furnace
| 4.1 temperature rising speed: ～300℃/h, adjustable; 4.2 rotary speed: 10~12m/min 4.3max capacity: 600Kg 4.4 fuel type: diesel oil; heat value: Qd=9600kcal/kg; fuel type: natural gas, heat value: Q=8600Kcal/m3; 4.5 max consumption: about 20KG/h for diesel oil; 22m3/h for natural gas; 4.6 max air consumption: 60M3/h 4.7 max fume quantity: 53M3/h 4.8 burner type: diesel oil burner, 1 set; natural gas burner, 1 set; 4.9 temperature zone: 1 zone; 4.10 temperature uniformity: ±30℃ (temperature of the effective heating zone measured at the holding stage) 4.11 overall size: 3310(L)×2258(W)X1564(H) 4.12 max furnace temperature:1000℃ |
5. Furnace Structure
The melting furnace is comprised of furnace body, seat, driving mechanism,
sealing mechanism, burning device, air piping system, temperature control system, etc.The rotary zinc
metal melting furnace takes cogwheel and pin rack driving device. The motor, arrester,
cycloidal pin wheel reducer, and cogwheel are mounted at the lower part of the side furnace.
The foundation should have enough depth and strength to prevent looseness of the furnace seat.
zinc rotary metal melting furnace exported to Saudi Arabia
Product Tags:
|
|
5.5KW Power Economical Type Metal Melting Furnaces Gas And Oil Double Fuel Images
|
